Glue Dispenser

Case description:

The main features of the 3C industry dispensing machine are: the electronic components that need to be dispensed are smaller, the load is light, and the running speed is high.

The middle space is the dispensing operation space, so the horizontal console is placed on the top, and the belt and tooth plate structure are fixed with the guide slide block to achieve horizontal movement.

The vertical direction is also fixed by the belt wheel and the belt and the guide slide block, which drives the dispensing head to move up and down.

For dispensing there are certain accuracy requirements, usually the S2M or S3M synchronous belt pulley is used with the synchronous belt.

Because the workpiece is small, it is used to transport the tool with double row synchronous belt, and the motor shaft is matched with double synchronous belt wheel to ensure the synchronization of the belt transport.

Workpiece conveyor belt recommended polyurethane belt, to ensure low dust; The motor drive belt is short and the tension is large. The rubber belt is used.